Tempered glass
Still deciding? Get a sample first, contact us!
Category:
High-end hollow and laminated glass
Keyword:
Intelligent embroidery machine
High end hollow and laminated glass
- Product Description
-
Tempered Glass Tempered glass is produced by heating glass to its softening point in a horizontal or bending tempering furnace and then rapidly and evenly cooling it with cold air. This process creates uniform compressive stress on the surface of the glass and tensile stress inside, effectively increasing its bending and impact resistance to four times that of ordinary glass. When it breaks, it shatters into small, uniform, non-sharp fragments, making it an ideal safety glass for modern life.
Product Features:
High safety;
High strength, tempered glass strength is 4 times that of ordinary annealed glass, semi-tempered;
Glass strength is twice that of ordinary annealed glass;
High resistance to thermal stress and wind pressure;
Excellent bending and impact resistance;
Product Applications:
Architectural safety glass, interior and exterior decoration, glass railings and escalator handrails, glass furniture, shelves, counters, telephone booths, etc., glass curtain walls for buildings, window glass
Specifications Product Standards Tempered Glass Product Specifications
Maximum size: 2440x5100mm
Minimum size: 150x250mm
Thickness range: 3~19mm
Semi-tempered Glass Product Specifications
Maximum size: 2440x 5100mm
Minimum size: 150x250mm
Thickness range: 4~10mm
Bent Tempered Glass Product Specifications
Maximum size: 2440x 3000mm
Minimum size: 500x500mm
Thickness range: 5~19mm
Maximum processing size: 2440x 6000mm
Minimum radius: 5~6mm, 1500mm 8~12mm,
1800mm 15~19mm, 2000mmComplies with GB/T 15763.2 National Standard for Architectural Safety Glass, Part 2: Tempered Glass
Passed China CCC safety glass certification
Passed US SGCC (ANSI Z97.1, CPS 16CFR 1201) safety glass certification
Passed UK BS 6026, BS EN 12150 safety glass standard certificationPrecautions 1. Tempered glass may exhibit slight optical distortion when viewed from a certain angle. This is a characteristic of tempered glass.
2. All glass must be cut to the required size, drilled, and edged before the tempering process. Cutting and arbitrary edge processing cannot be performed after tempering.
Recommended Products
Inquire Now
Note: Please leave your email address, and our professionals will contact you as soon as possible!
Address: Lilian Village, Huandong Street, Zhuji City